REMKO AMT 30 – 50 Mobile Dehumidifier Operation Technology Spare Parts Edition GB – M02 REMKO - powerful like a bear.
10 6. Do not clean with a water jet. 7. Clean evaporator lamellas with a lukewarm soap solution. 8. Rinse with clean water to remove any rema
11 Wiring Diagram H1 = Control lamp, yellow (tank full) H2 = Control lamp, green (operation) K1 = Time relay (t = 30 min / Pos. max.) M1 = Co
12 Exploded View AMT 30 We reserve the right to make modifications in dimensions and construction in the interests of technical progress. 18 08/021 2
13 Spare Part List AMT 30 No. Designation Ref.-No. 1 air suction grille 1104487 2 dust filter 1104486 3 housing 1104551 4 side plate,
14 We reserve the right to make modifications in dimensions and construction in the interests of technical progress. Exploded View AMT 50
15 Spare Part List AMT 50 No. Designation Ref.-No. 1 air suction grille 1104501 2 dust filter 1104500 3 housing 1104502 4 side plate,
REMKO GmbH & Co. KG Klima- und Wärmetechnik D-32791 Lage • Im Seelenkamp 12 D-32777 Lage • PO Box 1827 Phone +49 (5232) 606 - 0 Fax +49 (
3 Make sure to read these instructions carefully before starting/using the unit! Our guarantee will become void when the unit supplied by us is used
4 Air Dehumidification The processes that take place during air dehumidifica-tion are based on physical laws. We will try to describe these in a simp
5 Water Vapour Condensation The maximum possible percentage of water vapour that can be absorbed becomes higher while the air is heated, but the o
6 Function If you switch on the unit on the main switch, it will run in a fully automatically operation. Unit Description These unit have been desi
7 Installation of the condensate tank We recommend cleaning of the condensate tank with a clean cloth after its removal. ◊ Please install the cleaned
8 Starting The unit is automatically switched on if the humidity rate in the room is higher than the previously set valve. The unit operates fully aut
9 Discard the Unit Prior to longer operating breaks or pauses: 1. Remove the mains plug from the plug socket (or transitional socket). 2. Empty the co
Comments to this Manuals