Remko ETF 360 User Manual download pdf (Page 10)

10

REMKO ETF 360/460

Automatic defrost

The moisture contained in the

room air condenses on cooling and

covers the evaporator ﬁns with

frost or ice depending on the air

temperature and relative humidity

(% RH).

The automatic defrost function

integrated in the unit activates the

defrost cycle as required.

The frost or ice on the exchanger

surfaces can be defrosted using

hot gas as necessary.

This particularly fast and effective

defrost method guarantees a high

dehumidiﬁcation capacity.

Dehumidiﬁcation is interrupted

only brieﬂy during the defrost

phase.

The indicator light [] shows that

the hot gas defrost cycle is active.

Emptying condensation

collector

The installed condensation

collector must be emptied from

time to time depending on the

amount of condensation produced.

When the condensation collector

is full, operation is interrupted and

the “Collector full” indicator light

[] ﬂashes to show this status.

1. Carefully pull out the full

collector.

2. Empty the collector at a suitable

place.

3. Carefully place the emptied and

checked condensation collector

back in the unit.

s

s

s

Activate timer

With the timer function, automatic

“ON/OFF” switching functions

can be preselected up to 24 hours

(in a one hour cycle).

Timer switching functions

Adjustment during operation:

The unit switches OFF depending

on the selected number of hours.

Adjustment must be made with

the unit switched off (the mains

plug must be connected to a mains

socket).

The unit switches ON depending

on the selected number of hours.

■

The timer function can be

activated with the [] button

and the required time selected in

hour steps (max. 24 hours).

The entered value ﬂashes in the

display [] for about 10 seconds.

An activated timer is indicated

constantly by the indicator light

[] at the control panel.

All programmed values/

settings are deleted when the

unit is disconnected from the

mains.

ATTENTION

!

At a sufﬁciently high room

temperature, no frost normally

forms on the ﬁn surface,

obviating the need for

defrosting.

This makes the dehumidiﬁer

operate highly efﬁciently.

NOTE

The unit will only start when

the condensation collector is

correctly seated.

NOTE

The unit cannot be controlled

via an external timer.

NOTE

After each emptying, the

condensate container including

ﬂoat must be checked for pos-

sible damage, fouling, etc.

NOTE

The “Collector full“ indicator light

extinguishes and the unit continues

to operate fully automatically.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments