Remko ETF 360 User Manual download pdf (Page 13)

13

Troubleshooting

The units were manufactured using

the latest production methods

and tested repeatedly for perfect

function.

If faults should still occur, the unit

must initially be checked against

the following list.

The unit does not start:

■

Check The timer programming

Indicator light [] lit?

■

Check the mains connection and

local mains fuse -230V/1~/50

Hz

■

Check the mains plug and

power cord for damage

■

Check the level in the

condensation collector

Check for correct seating

The “Collector full” indicator

light [] must not ﬂ ash!

■

Test the function of the

condensation collector

microswitch [MS].

■

Check for free air intake and

discharge

Overheating!

■

Check fuse on the control

board

This work makes it necessary

to open the unit which must

only be carried out by an

authorised specialist company.

5. Carefully clean the air ﬁ lter [F]

with a soft brush or vacuum

cleaner.

6. A heavily clogged ﬁ lter [F]

can be washed in a warm

(maximum 40°C) soap solution.

Subsequently rinse thoroughly

with clear water and allow to

dry!

7. The air inlet grille [G] must also

be checked for clogging and

cleaned if necessary.

8. Prior to reﬁ tting, it must be

ensured that the air inlet

grille [G] and air ﬁ lter [F]

are completely dry and

undamaged.

NOTE

Heavily fouled or damaged air

ﬁ lters must be replaced with

new ones.

Only original spare parts must

be used.

NOTE

Repairs must only be carried

out by authorised specialists.

s

s

s

Filter cleaning

The unit is provided with an air

inlet grille with integrated air ﬁ lter

to prevent damage.

To prevent a reduction in

performance and faults, the air

inlet grille with ﬁ lter must be

checked as required, however at

least every two weeks and cleaned

if necessary.

1. Switch off the unit at the control

panel (button []).

2. Disconnect the mains plug from

the mains socket.

3. Remove the condensation

collector [K].

4. Pull out the air ﬁ lter [F] located

behind the air inlet grille from

below.

The units must not be used

without air inlet grille and air

ﬁ lter ﬁ tted!

ATTENTION

!

All programmed values/

settings are deleted when the

unit is disconne cted from the

mains.

ATTENTION

!

K

F

G

F

F

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments