Remko CLK 80-RV User Manual

Edition GB - D09REMKO CLK 80-RV CLK 170-RVOil heatersOperation · Technology · Replacement parts

10REMKO CLK 80/170-RVControl panel12987651 = Thermostat receptacle2 = Strapping plug5 = Operating switch6 = Indicator light "GREEN" "Op

111. Move the operating switch to the "0" (off) position.2. Shut off fuel supply.3. With longer periods of inactivity, disconnect t

12REMKO CLK 80/170-RVCleaning the heat exchanger1. Set the operating switch to the "0" position and remove the power plug from the mains s

13sssCleaning the combustion chamber1. Set the operating switch to the "0" position and remove the power plug from the mains socket.2. R

14REMKO CLK 80/170-RVsssTensioning the V-belt1. Remove the two side air intake grills.2. Loosen the screws (size 13) [7]. The screw on the opposit

15The units are designed exclusively for heating and ventilation purposes in industrial or commercial use (no living space heating in private use) on

16REMKO CLK 80/170-RVExploded view of the unit44436162601567981121222310252627382830313345484640416260606667696871724366120243212133234354246475052515

17Spare parts listWhen ordering spare parts, please state the EDP no., unit number and type (see name plate)!No. Description CLK 80-RV CLK 170-RV01 Co

18REMKO CLK 80/170-RVElectrical wiring diagram CLK 80-RVWe reserve the right to modify the dimensions and design as part of the ongoing technical deve

19Electrical wiring diagram CLK 170-RVLoad circuitControl circuitLegend:S1 = Operating switchS2 = Reset button (burner)H1 = Operating lamp

20REMKO CLK 80/170-RVAfter loosening the 4 fastening bolts the mounting baseplate M is pulled off the housing G. From size SL 44, 6 fastening screws m

21Setting the pump pressureThe pump pressure should be adjusted, and checked if necessary, during burner commissioning and during every service. Adjus

22REMKO CLK 80/170-RVMaintenance protocol1. Date: ...Signature2. Date: ...

23Technical dataWe reserve the right to modify the dimensions and design as part of the ongoing technical development process.1) At ∆t 45K / 1.2 kg/m3

ConsultingThanks to intensive training, our consultants are always completely up-to-date when it comes to technical expertise. This has given us the r

3Carefully read this operating manual prior to commissioning / using the unit!This operating manual is a translation of the German original.These inst

4REMKO CLK 80/170-RVSafety notes The units may only be operated by persons that have been extensively instructed in the operation of the equipment

5Locations at which units are usedAs mobile, directly fired fan-assisted heaters, the units deliver instant heat. They are designed exclusively for co

6REMKO CLK 80/170-RVInstallation instructionsThe safety regulations of the accident prevention and insurance associations, the respective regional bui

7Safety equipmentThe units have the following control or safety equipment:Temperature controller (TR)The temperature controller controls the switching

8REMKO CLK 80/170-RVExample 1 Operation with extended exhaust gas ductingCondensate traprequired.Example 2 Operation without extended exhaust gas duct

9Air distributionThe units are equipped with a high performance radial fan, which has been designed to transport the heated air efficiently and effecti