Remko RKL 491 DC User Manual download pdf (Page 10)

IR

2

1

10

12

14

FAN

TEMP.

ON/OFF

FUZZY

C

TIMER

MODE

17

Fig. 4: Infrared remote control

IR Infrared transmitter

Cooling mode ( )

1. Switch the unit on by means of the "I / 0"

button.

2. Set the temperature selection switch to the

desired nominal temperature.

3. Select the desired fan mode to AUTO, HI,

MED or LO by means of the "MODE" button.

Circulated air mode ( )

1. Switch the unit on by means of the "I / 0"

button.

2. Select FAN mode by means of the "MODE"

button. (Remote control )

The outdoor unit can remain in the room in circu-

lated air mode. However, do not hang the outdoor

unit onto the indoor unit.

Indication of the fan speed:

= high speed

= average speed

= low speed

FUZZY

= automatic speed

Dehumidifying mode DE-HUM. ( )

Position the indoor unit and the outdoor unit in the

room that is to be dehumidified.

1. Ensure that the indoor unit cannot extract

warm air from the outdoor unit.

2. Do not hang the outdoor unit onto the indoor

unit.

3. Please observe: The condensate formed

during dehumidification may not be pumped

to the outdoor unit as otherwise it will be dis-

sipated back into the air in the room or may

run out of the outdoor unit.

4. Take the condensate drain hose on the back

of the indoor unit out of its bracket and

remove the plug.

5. Allow the condensate to drain downwards

into a drain or container.

NOTICE!

Ensure that the external container does

not overflow. This could result in water

damage.

6. Switch the unit on by means of the "I / 0"

button.

7. Set the temperature selection switch to the

lowest nominal temperature.

8. Set the "MODE" button to the lowest fan

speed "LO".

REMKO RKL

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments