NOTICE!
Never twist the the fixed upper section.
12. Screw continuously until the connection is
disconnected.
NOTICE!
Do not stop screwing in the event that
refrigerant escapes and a slight hissing
sound is heard.
13. Screw the protective caps provided onto the
4 coupling halves (
Fig. 16).
14. Ensure that there is a wall opening available
of Ø 60 mm in the event that the connecting
line is to be fed through a wall.
15. After the placement or mounting of the indoor
unit and outdoor unit is complete, the con-
necting line can be hooked up to the indoor
unit in the opposite order.
16. After making the connections, check the
quick-release couplings for leaks.
Fig. 14: Unscrew the left-hand union nut
A: Hold to prevent turning
B: Tighten
C: Loosen
D: Remove cable strap
Fig. 15: Unscrew the right-hand union nut
A: Hold to prevent turning
B: Tighten
C: Loosen
Fig. 16: Screw on protective caps
1: Protective caps
REMKO RKL
16
Comments to this Manuals